The semi-automatic feeder is a relatively important equipment inpoultry farming equipment. Farmers use feeders to feed the chickens in the chicken house. Not only is the operation convenient and the feeding uniform, but the farmers can also adjust the feeding size of the feeding machine, and the feeding can be automatically set after a set time, saving time and effort. The following author will introduce the use steps and precautions of the feeder.

Steps of using the feeder:
 
When the feeder is started, it cannot put anything on it, because it will burn out the motor because of the excessive pressure on the motor. So be sure to check each time you start the feeder to see if there is something on it. If there is any, it must be cleaned in time, and then the machine is started.

Step two of using the feeder:
 
The feeder is used to transfer material by leather belt, so be sure to check in time whether the belt is intact, loose, and tight. Only when everything is normal can the production performance of the machine be fully utilized, the workload can be maximized, and the machine will not be damaged.

Step three of using the feeder:

The various parts of the feeder are controlled by gears and chains. In this way, it is necessary to ensure that the gearchicken farming equipmentaccessories and the chain guarantee maximum lubrication so that the machine will not be damaged due to lack of lubrication.

Step four of using the feeder:
 
During the production of feed, a large amount of dust will be generated. This will cause a large amount of dust to accumulate in the control box of the feeder. In the long run, the internal circuit will be short-circuited due to dust, which will damage electrical circuits and other components. So clean the dust in the control box every time.

The feeding machine adopts a uniform feeding device for feed, which can be self-gravity and evenly spread the feed to the trough through the feeding tube. This can avoid the spillage of artificial feeding, and also save the feed. It can also save labor. This machine is a single feeding of the vehicle. It runs for five to eight minutes in a 0 meter henhouse.